McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

154
InteropMode Interoperability mode. This setting must be the same on all switches in
the fabric, otherwise the inter-switch links will not connect. Choose from
the following:
• Use Standard to connect to FC-SW-2-compliant switches including
McDATA switches in Open Fabric Mode. This is the default.
• Use the McDATA Fabric Mode to connect to McDATA switches in
McDATA Fabric Mode.
239DomainSupport 239 domain ID support. Enables (True) or disables (False) support for
valid domain IDs 1–239. All switches in the fabric must support 239
domain IDs. The default is False.
Table 23 Set Config Switch parameters (Continued)
Parameter Description
Examples The following is an example of the Set Config Switch command:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config edit
McDATA4GbSAN (admin-config) #> set config switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState (1=Online, 2=Offline, 3=Diagnostics) [Online ]
BroadcastEnabled (True / False) [True ]
InbandEnabled (True / False) [True ]
FDMIEnabled (True / False) [True ]
FDMIEntries (decimal value, 0-1000) [1000 ]
DefaultDomainID (decimal value, 97-127) [2 ]
DomainIDLock (True / False) [False ]
SymbolicName (string, max=32 chars) [4Gb SAN Switch]
R_A_TOV (decimal value, 100-100000 msec) [10000 ]
E_D_TOV (decimal value, 10-20000 msec) [2000 ]
PrincipalPriority (decimal value, 1-255) [254 ]
ConfigDescription (string, max=64 chars) [Default Config]
InteropMode (0=Standard, 1=McData Fabric Mode) [Standard ]
239DomainSupport (True / False) [False ]
See also Config command, page 100
Show Config Switch command, page 179