McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

152
Examples The following is an example of the Set Config Security Switchbinding command:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config edit
The config named default is being edited.
McDATA4GbSAN (admin-config) #> set config security switchbinding
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
SwitchBindingEnable (True/False) [True ]
SwitchBindingState (AllPorts/EPorts/FPorts) [Fports] AllPorts
WWN (N=None/WWN) [None] 10:00:00:00:c9:4d:27:17
WWN (N=None/WWN) [None] 50:05:08:b2:00:b5:d2:73
WWN (N=None/WWN) [None ]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.