McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 145
Set Beacon command
Description Enables or disables the flashing of the Logged-In LEDs.
Authority None
Syntax
set beacon [state]
Operands [state] can be one of the following:
on
Enables the flashing beacon.
off
Disables the flashing beacon.
Examples The following is an example of the Set Beacon command:
McDATA4GbSAN #> set beacon on