McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

144
Set Alarm command
Description Controls the display of alarms in the session output stream or clears the alarm log.
Authority Admin session for the Clear operand. Otherwise, none.
Syntax
set alarm [option]
Operands [option] can be one of the following:
clear
Clears the alarm log history. This value requires an Admin session.
on
Enables the display of alarms in the session output stream.
off
Disables the display of alarms in the session output stream. Disabling the display of alarms in
the output stream allows command scripts to run without interruption.
Examples The following is an example of the Set Alarm command:
McDATA4GbSAN #> set alarm on
See also Set Log command, page 158
Show Alarm command, page 174