McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

116
edit [group] [member]
Initiates an editing session in which to change the attributes of a WWN given by [member] in
a group given by [group]. Member attributes that can be changed are described in Table 9.
Table 9 Group member attributes
Attribute Description
Authentication
(ISL and Port Groups)
Enables (CHAP) or disables (None) authentication using Challenge
Handshake Authentication Protocol. The default is None.
CTAuthentication
(MS Groups)
CT authentication. Enables (True) or disables (False) authentication for MS
group members. The default is False.
Primary Hash
(ISL and Port Groups)
The preferred hash function to use to decipher the encrypted Primary Secret
sent by the member. The hash functions are MD5 or SHA-1. If the member
does not support the Primary Hash, the switch will use the Secondary Hash.
Hash
(MS Groups)
The hash function to use to decipher the encrypted Secret sent by the MS
group member. Hash values are MD5 or SHA-1.
Primary Secret
(ISL and Port Groups)
Hexadecimal string that is encrypted by the Primary Hash for authentication
with the member. The string has the following lengths depending on the
Primary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Secondary Hash
(ISL and Port Groups)
Hash function to use to decipher the encrypted Secondary Secret sent by
the group member. Hash values are MD5 or SHA-1. The Secondary Hash
is used when the Primary Hash is not available on the group member. The
Primary Hash and the Secondary Hash cannot be the same.
NOTE: Secondary Hash is not supported when connecting to other
McDATA products.
Secondary Secret
(ISL and Port Groups)
Hex string that is encrypted by the Secondary Hash and sent for
authentication. The string has the following lengths, depending on the
Secondary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
NOTE: Secondary Secret is not supported when connecting to
other McDATA products.
Secret
(MS Groups)
Hexadecimal string that is encrypted by the Hash function for authentication
with MS group members. The string has the following lengths, depending
on the Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Binding
(ISL Groups)
Domain ID of the switch to which to bind the ISL group member WWN. This
option is available only if FabricBindingEnabled is set to True using
the Set Config Security command. 0 (zero) specifies no binding.