McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 113
Group command
Description Creates groups, manages membership within the group, and manages the membership of groups in
security sets.
IMPORTANT: This command is available only with the SANtegrity Enhanced PFE key.
Authority Admin session and a Security Edit session. See the Security command for information
about starting a Security Edit session. The List, Members, Securitysets, and Type
operands are available without an Admin session.
Syntax
group
add [group]
copy [group_source] [group_destination]
create [group] [type]
delete [group]
edit [group] [member]
list
members [group]
remove [group] [member_list]
rename [group_old] [group_new]
securitysets [group]
type [group]
Operands
add [group]
Initiates an editing session in which to specify a group member and its attributes for the existing
group given by [group]. ISL, Port, and MS member attributes are described in Table 6,
Table 7, and Table 8 respectively. The group name and group type attributes are read-only fields
common to all three tables.
Table 6 ISL Group member attributes
Attribute Description
Member WWN of the switch that would attach to the switch. A member cannot belong to
more than one group.
Authentication Enables (CHAP) or disables (None) authentication using Challenge Handshake
Authentication Protocol. The default is None.
Primary Hash The preferred hash function to use to decipher the encrypted Primary Secret sent
by the ISL member. The hash functions are MD5 or SHA-1. If the ISL member does
not support the Primary Hash, the switch will use the Secondary Hash.
Primary Secret Hexadecimal string that is encrypted by the Primary Hash for authentication with
the ISL group member. The string has the following lengths, depending on the
Primary Hash function:
• MD5 hash: 16-byte
• SHA-1 hash: 20-byte