User Manual
Table Of Contents
- Contents
- About this guide
- Using McDATA Web Server/Element Manager
- Managing Fabrics
- Securing a fabric
- Security consistency checklist
- Connection security
- User account security
- Remote authentication
- Device security
- Edit Security dialog
- Create Security Set dialog
- Create Security Group dialog
- Create Security Group Member dialog
- Editing the security configuration on a switch
- Viewing properties of a security set, group, or member
- Security Config dialog
- Archiving a security configuration to a file
- Activating a security set
- Deactivating a security set
- Configured Security data window
- Active Security data window
- Fabric services
- Rediscovering a fabric
- Displaying the event browser
- Working with device information and nicknames
- Zoning a fabric
- Zoning concepts
- Managing the zoning database
- Managing the active zone set
- Managing zones
- Merging fabrics and zoning
- Securing a fabric
- Managing switches
- Managing user accounts
- Configuring RADIUS servers
- Displaying switch information
- Configuring port threshold alarms
- Paging a switch
- Setting the date/time and enabling NTP client
- Resetting a switch
- Configuring a switch
- Archiving a switch
- Switch binding
- Restoring a switch
- Restoring the factory default configuration
- Downloading a support file
- Installing Product Feature Enablement keys
- Installing firmware
- Displaying hardware status
- Managing ports
- Glossary
- Index
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 61
Status
Operational State Switch operational state: Online, Offline, Diagnostic, Down
Administrative State Current switch administrative state
Configured Admin State Switch administrative state that is stored in the switch configuration
Beacon Status Beacon status. Switch LEDs are blinking (On) or not (off).
Reason for Status Additional status information
Temperature Internal switch temperature °C
Fan 1 Status Not applicable.
Fan 2 Status Not applicable.
Fan 3 Status Not applicable.
Power Supply 1 Status Switch power status
Power Supply 2 Status Not applicable.
Temp Failure Port Shutdown Port shutdown status when failure temperature is exceeded.
Warning Temperature Temperature threshold (65° Celsius) above which a warning
condition alarm is generated.
Failure Temperature Temperature threshold (70° Celsius) above which a failure condition
alarm is generated.
Diag Status Diagnostic status
Diag Fault Code Not applicable.
Test Status Not applicable.
Test Fault Code Not applicable.
Network
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
SNMP Enabled SNMP enabled or disabled.
Broadcast Support Broadcast support status. Broadcast support is enabled (default) or
disabled.
NTP Client Enabled Enabled or disabled. Allows for switches to synchronize their time to
a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet connection to
NTP server is required.
Use Front Port Not applicable.
Table 8 Switch data window entries (Continued)
Entry Description