User Manual

HA-Fabric Manager user guide 79
NOTE: The Product Type and Access tab may not be available in all situations.
1. Select Discover > Setup.
The Discover Setup dialog box is displayed (Figure 32 on page 72).
2. Click Add.
The Address Properties dialog box is displayed (Figure 35 on page 76).
3. Click the Product Type and Access tab. The Product Type and Access tab is displayed
(Figure 37).
Figure 37 Address Properties dialog box (Product Type and Access tab)
4. Select the type of device from the Product Type list.
•If you select CIM/WBEM Services from the Product Type list, enter a name in the Name
Space box then go to step 14.
•If you select Clariion from the Product Type list, go to step 16.
•If you select HDS from the Product Type list, go to step 14.
•If you select HP XP Storage from the Product Type list, go to step 14.
•If you select IBM ESS Storage from the Product Type list, go to step 14.
•1If you select NetApp from the Product Type list, do the following:
• Select the product protocol from the Protocol list.
• Enter the product DFM port number in the DFM Port box.
•Go to step 14.
•If you select <not specified> from the Product Type list, go to step 16.
•If you select Switch from the Product Type list, go to step 14.
•If you select Symmetrix from the Product Type list, go to step 16.
5. Enter a user ID in the User ID box.
6. Enter the password in the Password and Retype Password boxes.
7. Click OK.