User Manual

HA-Fabric Manager user guide 271
NOTE: In Figure 119, gray lines on the HBA indicate no activity on those connections.
Figure 119 Connection performance as displayed on Physical Map
Figure 120 Switch on topology showing ports
Event Management
Event Management enables you to specify triggers and actions to automate tasks. For example, you
can set an event trigger to fire at a certain time and day (everyday at noon) and associate the
action of sending an e-mail message.
Event trigger properties
This section describes the properties you can set for event triggers.
SNMP trap event properties
SNMP trap events occur when the appliance receives an SNMP trap.
Table 38 describes trap event properties.
Table 38 SNMP trap event properties
Property Description
IP Address Device’s IP address
Node Name Device’s WWN
Port Name Port’s WWN