User Manual

HA-Fabric Manager user guide 149
• Remove a member from a zone (see ”Removing a member from a zone” on page 152).
• Remove a zone from a zone set (see ”Removing a zone from a zone set” on page 152).
• Activate a zone set (see ”Activating a zone set” on page 152).
• Deactivate a zone set (see ”Deactivating a zone set” on page 153).
• Enable or disable the default zone (see ”Enabling and disabling the default zone” on
page 154).
• Export a zone set (see ”Exporting a zone set” on page 155).
• Import a zone set (see ”Importing a zone set” on page 156).
NOTE: Only one appliance should perform discovery at a time, otherwise logon conflicts can
occur.
Displaying the zone library
To display the zone library:
1. Select Configure > Zoning.
The Zoning dialog box is displayed (Figure 91).
Figure 91 Zoning dialog box
2. Select a fabric from the Fabric list.
This defines the fabric for the zoning actions.