User Manual

HA-Fabric Manager user guide 99
The Configure Trap Forwarding dialog box is displayed (Figure 57).
Figure 57 Configure Trap Forwarding dialog box
2. If necessary, add trap recipients to the Available Recipients list.
See ”Adding trap recipients” on page 99 for instructions.
3. Select the recipient that you want to provide trap messages to in the Available Recipients list.
4. Click the right arrow button.
5. Scan the Selected Recipients list, and, if necessary, select recipients to move from the list and
then click left arrow button.
6. Select the Enable Trap Forwarding check box.
7. Click OK.
Adding trap recipients
To add a trap recipient:
1. Select Monitor > Trap Forwarding.
The Configure Trap Forwarding dialog box is displayed (Figure 57).
2. Click Add.
The Add Trap Recipient dialog box is displayed (Figure 58).
Figure 58 Add Trap Recipient dialog box
3. Enter the appropriate information in the following boxes:
•Description
• IP Address
•Port