Specifications

Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. This can cause vertical streaks on copy jobs from the document feeder, and specks
on copy jobs from the flatbed scanner glass. Use the following procedure to clean the scanner glass and
white plastic backing.
1. Use the power switch to turn off the
product, and then unplug the power cord
from the electrical socket.
2. Open the scanner lid.
3. For specks on flatbed copy jobs, clean the
scanner glass and the white plastic
backing with a soft cloth or sponge that has
been moistened with nonabrasive glass
cleaner.
For vertical streaks on document feeder
copy jobs, clean the document feeder
scanner strip on the left side of the product
with a soft cloth or sponge that has been
moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives,
acetone, benzene, ammonia, ethyl alcohol,
or carbon tetrachloride on any part of the
product; these can damage the product.
Do not place liquids directly on the glass or
platen. They might seep and damage the
product.
4. Dry the glass and white plastic with a
chamois or a cellulose sponge to prevent
spotting.
5. Plug in the product, and then use the
power switch to turn on the product.
ENWW
Check the scanner glass for dirt and smudges
11