Product Datasheet/Brochure

ManualsBrandsHP ManualsBlack & White Laser PrintersLaserJet Enterprise Black-and-White All-In-One Laser Printer - White

Data sheet | HP LaserJet Enterprise MFP M430 series

Product walkaround

1. 4.3-inch (10.9 cm) color touchscreen

2. Easy-access USB port

3. 150-sheet output bin

4. Automatic two-sided printing (default)

5. 100-sheet multipurpose input tray 1

6. 250-sheet input tray 2

7. 50-sheet automatic document feeder (ADF)

8. Convenient front on/off switch

9. Right door, access to print path

10. Front door, access to Original HP Toner cartridges with JetIntelligence

11. Hi-Speed USB 2.0 port for third-party devices

12. Hi-Speed USB 2.0 printing port

13. Gigabit Ethernet network port

Series at a glance

Model HP LaserJet Enterprise MFP M430f

Product number 3PZ55A

Print speed (Letter/A4) Up to 40/38 ppm (default); 42/40 ppm (HP High Speed)

First page out (Letter/A4) As fast as 6.3/6.5 seconds

Control panel 4.3" (10.9 cm) color touchscreen

Memory 2 GB

Storage 16 GB eMMC

Automatic two-sided printing (default)1 √

Input capacity (standard/maximum) Up to 350/900 sheets

100-sheet input tray 1 √

250-sheet input tray 2 √

550-sheet input tray 3 Optional

Recommended monthly page volume (RMPV) 900 to 4,800 pages

Duty cycle Up to 100,000 pages

Cartridge yields 3,000 pages (A) or 10,000 pages (X)

Dual-band Wi-Fi with Bluetooth® Low Energy, Wi-Fi Direct® Optional

ENERGY STAR® qualified √

Automatic two-sided printing dependent upon country setup specifications.

Measured using ISO/IEC 24734 Office Suite and Feature Tests, excludes first set of test documents. For more information, see hp.com/go/printerclaims. Exact speed varies depending on the system configuration, software application, driver, document complexity,

media size, media orientation, and media type. HPHigh Speed may require firmware upgrade to enable.

First page out measured using ISO/IEC 17629. For more information see hp.com/go/printerclaims. Exact speed varies depending on the system configuration, software application, driver, and document complexity.

HP recommends that the number of pages per month of imaged output be within the stated range for optimum device performance, based on factors including supplies replacement intervals and device life over an extended warranty period.

Mobile device needs to be connected directly to the signal of a Wi-Fi Direct supported MFP or printer prior to printing. Depending on mobile device, an app or driver may also be required. Wi-Fi Direct is a registered trademark of Wi-Fi Alliance. For details, see

hp.com/go/mobileprinting.

An administrator must enable the easy-access USB port before use.