User Guide

Assigning the Function buttons
Pressing the Menu button or one of the Function buttons on the front bezel activates the buttons and displays
the icons above the buttons. The default button icons and functions are shown below.
Button Function
1 Menu Opens the OSD (on-screen display) menu.
2 Information
(Function button 1 -
assignable)
Opens the Information menu.
3 Next Active Input
(Function button 2 -
assignable)
Switches the monitor's input source to the next active input.
4 Color Control
(Function button 3 -
assignable)
Opens the Color menu to adjust the screen color.
You can change the Function buttons from their default values so that when the buttons are activated you can
quickly access commonly used menu items.
To assign the Function buttons:
1. Press one of the four front bezel buttons to activate the buttons, and then press the Menu button to
open the OSD.
2. In the OSD menu, select Menu Control > Assign Buttons and then select one of the available options for
the button you want to assign.
NOTE: You can only reassign the three Function buttons. You can not reassign the Menu button or the power
button.
Using Auto-Sleep Mode
The monitor supports an OSD menu option called Auto-Sleep Mode that allows you to enable or disable a
reduced power state for the monitor. When Auto-Sleep Mode is enabled (enabled by default), the monitor will
enter a reduced power state when the host PC signals low power mode (absence of either horizontal or
vertical sync signal).
Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned
o and the power LED indicator turns amber. The monitor draws less than 0.5 W of power when in this
reduced power state. The monitor will wake from the sleep mode when the host PC sends an active signal to
the monitor (for example, if you activate the mouse or keyboard).
You can disable Auto-Sleep Mode in the OSD. Press one of the four front bezel buttons to activate the buttons,
and then press the Menu button to open the OSD. In the OSD menu select Power Control > Auto-Sleep Mode
> O.
16 Chapter 2 Using the monitor