Installation manual
Table Of Contents
- Safety precautions
- Introduction
- Receive the shipment
- Set up the printer in the final position
- Connect the power cables
- Configure the electrical system
- Purge the ink system
- Prepare the printer
- Prepare for printing
- Prepare the HP Internal Print Server (Japan and Russia only)
- Manually configure the printer’s IP address
- Change the Windows Vista language
B Manually configure the printer’s IP
address
If the customer does not have DHCP, the printer and/or Internal Print Server computer is not able to
automatically retrieve an IP address. In this case, you must manually configure the IP address. Use the
following procedure to manually configure the IP address for the printer.
1.
Select the setup menu icon
.
2. Select Connectivity.
3. Select Gigabit Ethernet.
4. Select View Information.
78 Appendix B Manually configure the printer’s IP address ENWW