Installation manual
Table Of Contents
- Safety precautions
- Introduction
- Receive the shipment
- Set up the printer in the final position
- Connect the power cables
- Configure the electrical system
- Purge the ink system
- Prepare the printer
- Prepare for printing
- Prepare the HP Internal Print Server (Japan and Russia only)
- Manually configure the printer’s IP address
- Change the Windows Vista language
2. In Internet Explorer, select Tools > Internet options > Connections > LAN settings.
3. Check By-pass proxy server for local addresses.
Install the HP Internal Print Server
TIP: If necessary, the HP Internal Print Sever executable file can be found on the web at
http://www.hp.com under the Support & Drivers tab.
1. Find the setup.exe icon on the desktop, double click on the icon and follow the on-screen
instructions.
76 Appendix A Prepare the HP Internal Print Server (Japan and Russia only) ENWW