Installation manual
Table Of Contents
- Safety precautions
- Introduction
- Receive the shipment
- Set up the printer in the final position
- Connect the power cables
- Configure the electrical system
- Purge the ink system
- Prepare the printer
- Prepare for printing
- Prepare the HP Internal Print Server (Japan and Russia only)
- Manually configure the printer’s IP address
- Change the Windows Vista language
3. Check that the Protective Bonding Conductor (green-and-yellow grounding cable) is well attached
to the back panel of the electrical cabinet.
4. Check that the Protective Bonding Conductor (green-and-yellow grounding cable) is well attached
to the input single-phase filter.
ENWW Power on the printer 33