Installation guide

39
4 Installing Mass Storage Devices
Introduction
The HP NetServer standard configuration is:
One hot-swap mass storage cage (primary)
◊ With requested drives installed
◊ With filler panels in the slots not occupied by drives
A flexible disk drive
A CD-ROM 32x drive
Non-hot-swap mass storage shelves
NOTE You can install a second hot-swap mass storage cage in the
NetServer. For information, refer to the HP NetServer
LH 3000/3000r and LH 6000/6000r Mass Storage Upgrade
Guide.
Non-hot-swap
drive shelves
Non-hot-swap
shelves
Secondary
hot-swap
cage
(optional)
Primary
hot-swap
cage
CD-ROM
drive
Flexible
disk drive
Figure 4-1. Standard Mass Storage Configuration