Installation guide

Chapter 12 Troubleshooting
146
8. Return switch 6 to the OFF position.
9. Follow the procedure in Chapter 3, "Opening and Closing the HP
NetServer," for closing up the server.
10. Reconnect power and cables.
11. Restore HP NetServer to normal operation.
12. If you wish to set the password again, during the power-on system
hardware test press the [F2] function key to start the Setup utility.
13. Set the new password in the Security menu.
14. Press the [F10] function key and answer
Yes
to save the configuration,
including the new password.
15. Exit the Setup utility.