Installation guide

Chapter 8 Installing the HP NetServer in an HP Rack System/E or Rack System/U
93
Top Cover
Right Cover
Bottom Cover
Remove two
screws securing
the NetServer
to the rack.
Remove two
screws securing
the NetServer
to the rack.
Do not remove
two screws
securing the
bracket
to the NetServer.
Do not remove
three screws
securing the
hinge to the
NetServer.
Figure 8-13. Bezel Hinge and Latch
Bezel
Latch
Bezel
Hinge
Lockout
Latch
Figure 8-14. Slide Lockout Releases
4. Install two screws through the bezel hinge into the rack nuts on the left
column of the rack (see Figure 8-15).