Technical information

96
Part
Number
Description RPM Height
Bays
Supported
Max
Qty
Bay Form
Factor
Height Front
Access
Usage
IDE HDDs
1, 2
1
1
89mm (3.5in) SL Yes HDD
2
19K4461
20.4GB 7200rpm ATA-100 (EIDE)
HDD
7200 SL 1, 2 2
2 89mm (3.5in) SL Ye s Open 22P7157
40GB 7200rpm ATA-100 (EIDE)
HDD
7200 S L 1, 2 2
1.
Boot drive should be located in bay 1.
2. SCSI models offered in the United States ship open bay.
Ultra160 HDDs
2
00N8207
9.1G B 10,000rpm Ultra160 SCSI
HDD
10000 SL 1, 2 2
00N8208
18.2GB 10,0 00rpm Ultra160 SC SI
HDD
10000 SL 1, 2 2
00N8209
36.4GB 10,000rpm Ultra160 SCSI
HDD
10000 SL 1, 2 2
19K0658
18.2GB 15,000rpm Ultra160 SCSI
HDD
15000 SL 1, 2 2
External Storage Expansion
Units
3
Form Factor
35311RU
Netfinity EXP300 Storage
Expansion Unit
4
Rack (3U)
35601RU
Netfinity FAStT EXP500 Storage
Expansion Unit
5
Rack (3U)
35421RU FAStT200 Storage Server
6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server
6
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. The xSeries 300 dual integrated EIDE controllers support a maximum of three IDE devices per machine
including one CD-ROM, and two IDE hard disk drives.
2. Mixing of internal IDE and SCSI hard disk drives is not supported.
3. xSeries 300 does not include an external SCSI connector. To configure a SCSI storage device, select an
optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller
supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other
expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the
Fibre Channel Solutions Overview section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
Floppy / CD-ROM
Bay 1 Bay 2