Technical information

78
Bay Form
Factor
Height Front
Access
Usage P / N Description RPM Height Bays
Supported
Max
Qty
A
133mm
(5.25in)
HH
1
Ye s O p e n
Ultra160 Hard Disk Drives (HDD)
1
B
133mm
(5.25in)
HH
1
Ye s Open 37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10000 SL C ... H 6
-
133mm
(5.25in)
HH Yes
IDE CD-
ROM
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10000 SL C ... H 6
-
89mm
(3.5in)
SL Ye s Diskette 37L7206
36.4G B 10K-4 Ultra160 SCSI Hot-S wap SL
HDD
10000 SL C ... H 6
C ... H HS SL Yes Open 19K0655
9.1GB 15Krpm Ultra160 SCSI Hot-Swap
HDD
15000 SL C ... H 6
1. Two half-high (HH) bays can be combined to support a single
full-high (FH) device.
19K0656
18.2GB 15Krpm Ultra160 SCSI Hot-Swap
HDD
15000 SL C ... H 6
06P5756
73.4GB 10Krpm Ultra160 SCSI Hot-Swap
SL HDD
10000 SL C ... H 6
Ext Storage Expansion Units
2
Form Factor
35311RU EXP300 Storage Expansion Unit
3
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
35601RU FAStT EXP500 Storage Expansion Unit
4
Rack (3U)
35421RU FAStT200 Storage Server
5, 6
Rack (3U)
35422RU FAStT200 HA Storage Server
5
Rack (3U)
19K1121 FAStT200 Redundant RAID Controller -
1. xSeries 240 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. To configure one of the SCSI storage devices listed here,
select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm that the
controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other
expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the
Fibre Channel Solutions Overview section.
3. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with
its own power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit
(P/N 09N7296) is required.
4. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each with
its own power cord.
5. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
6. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller
(P/N 19K1121).
B
CD-ROM
Diskette
Hot-Swap
(HS)
A
Removable Media (RM)
E
CF
G
H
D
A
B
CD-ROM
Diskette
Removable Media (RM)
Tower Model
Rack Model View
For clarity purposes, bay labels in
these diagrams are for reference
by the accompanying tables and
are not the actual labels. Refer to
the documentation shipped with
the system for further details on
actual labels.
C
D
E
F
G
H