Technical information

58
xSeries 220 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter
Incl
Ext Tape
Enclosures
1
09N4041
12/24GB DDS/3 4mm Internal SCSI
Tape Drive
2, 3
28
89mm
(3.5in) HH
or 133mm
(5.25in) HH
Y Y 3 510020, 35 510 01
09N4042 10/20GB NS Internal SCSI Tape Drive
2, 3
2, 4 8
89mm
(3.5in) SL or
133mm
(5.25in) HH
Y Y 3 510020, 35 51001
00N7991
20/40GB DDS/4 4mm Internal Tape
Drive
3
216 Ultra2 LVD
89mm
(3.5in) HH
or 133mm
(5.25in) HH
N-
3510020
4
,
3551001
5
00N8016 100/200GB LTO Tape Drive
10
- 16 Ultra2 LVD
133mm
(5.25in) FH
N - 3551001
5
24P2398
40/80GB Half-High DLTVS Internal SCSI
Ta p e D r i v e
3
216 Ultra2 LVD
133mm
(5.25in) HH
N-3551001
5
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader - 16 Ultra2 LVD
133mm
(5.25in) FH
N-3551001
5
External Tape Libraries
6
3570C2x Magstar MP 3570 Tape Subsystem - HVD 6U Rack Y - -
External Tape Enclosures
3510020 External Half High SCSI Storage Enclosure
7
- 8, 16 Desktop N N -
3551001 NetMEDIA Storage Expansion Unit EL
8
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
9
- 16 LVD - N N 3551001
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE External Y N 3510020
10K234 0 Media Bay Tray and LVD Cable Kit
3, 5
- 16 LVD Internal Y N 3551001
Note: All models include an Ultra160 SCSI controller. Nonhot-swap models include a five-drop multi-mode terminated LVD SCSI cable. Hot-swap models include a two-drop
nonterminated cable. Single-ended devices attached to this cable will limit the entire SCSI bus to single-ended performance. All tape drives and external tape enclosures are
supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode terminated LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to
Appendix D: Cables - Storage Units - Controllers.
2. This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide ultra160 SCSI Adapter (P/N
19K4646) which includes a five-drop multi-mode LVD SCSI cable.
3. RAID configurations, where the standard SCSI cable is attached to a RAID adapter, require the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and
LVD Cable Kit (P/N 10K2340) for attachment of the tape drive to the standard SCSI controller.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956)
5. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop multi-mode terminated cable. If the standard cables are
used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
6. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
7. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self
termination or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
8. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length
133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
9. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when
attached to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
10. Not supported for machine type 8646 models.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.