Technical information

54
xSeries 220 Hard Disk Drive (HDD) and External Storage
To t a l
Internal
Storage
1
10,000RPM HDDs 15,000RPM HDDs
9.1GB
(00N8207
or
37L7204)
2
18.2GB
(00N8208
or
37L7205)
2
36.4GB
(00N8209
or
37L7206)
2
73.4GB
(0 6P5752
or
06P5756)
2
9.1GB
19K0655
4
18.2GB
19K0658
or
19K0656
2
0GB Standard on some models
5
9.1G B 1 - - - 1 -
18.2GB21 - - 21
27.3 G B 3 - - - 3 -
36.4GB 4
3
21 - -2
45.5GB - - - - - -
54.6GB-3- - -3
72.8GB - 4
3
2 - - 4
91GB---- --
109.2 GB - - 3 - - -
14 5.6 GB - - 4
3
---
14 6.8G B - - - 2 - -
220.2GB - - - 3 - -
293.6GB
(max)
- - - 4
3
- -
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Both hot-swap and nonhot-swap HDDs are listed. Select the appropriate part number for the model of xSeries 220 being
configured.
3. A maximum of three hot-swap drives may be installed in hot-swap models. This configuration requires installation of a nonhot-
swap HDD in Bay 4.
4. Hot-Swap models only.
5. Models 8645-42X, 52X and 8646-22X, 32X, 42X ship standard with an 18.2GB Ultra160 SCSI HDD.
Hot-swap Models Nonhot-swap Models
Part
Number
Description RPM Height Bays
Supported
Maximum
Quantity
Bays
Supported
Maximum
Quantity
Nonhot-swap Ultra160 Hard Disk
Drives (HDD)
1
00N8207 9.1GB 10,000rpm Ultra160 SCSI HDD 10 00 0 SL 4 1 4 ... 7 4
00N8208 18.2GB 10,000rpm Ultra160 SCSI HDD 10000 SL 4 1 4 ... 7 4
00N8209 36.4GB 10,000rpm Ultra160 SCSI HDD 10000 SL 4 1 4 ... 7 4
19K06 58 18.2GB 15,000rpm Ulltra160 SCSI HD D 15000 SL 4 1 4 . . . 7 4
06P5752 73.4GB 10Krpm Ultra160 SCSI SL HDD 10 000 SL 4 1 4 ... 7 4
Hot-swap Ultra160 HDDs
2
37L7204 9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD 10000 SL 5 ... 7 3 - -
37L7205 18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD 10000 SL 5 ... 7 3 - -
37L7206 36.4GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD 1000 0 SL 5 ... 7 3 - -
19K0655 9.1GB 15K-rpm Ultra160 SCSI Hot-Swap HDD 15000 SL 5 ... 7 3 - -
19K0656 18.2GB 15K-rpm Ultra160 SCSI Hot-Swap HDD 15 00 0 SL 5 . .. 7 3 - -
06P5756 73.4GB 10Krpm Ultra160 SCSI Hot-Swap SL HDD 10000 SL 5 ... 7 3 - -
Optical Devices Bays Supported
10K3785 12X-8X-32X Black Internal CD-RW Drive
3
1, 2
22P6950 16X Max RAM-Read DVD-ROM Drive
3, 4
1, 2
External Storage Expansion Units
5
Form Factor
35311RU EXP300 Storage Expansion Unit
6
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
1. Nonhot-swap HDDs are supported in bays 4 ... 7 of nonhot-swap models and in bay four of hot-swap models.
2. Hot-swap HDDs are supported in bays 5 ... 7 of hot-swap models. Bay four supports nonhot-swap HDDs only.
3. Either replace the standard CD-ROM or install in the available media bay. An IDE cable with three connectors is included with the optional optical drive (same cable is
standard in the system). If installing as an additional device, connect the cable to each optical device and the IDE connector on the system board. Configure the optional device
as a master using the preset configuration if replacing the standard device or as a slave if installed as a redundant device. This option is supported for machine type 8646
models only.