Technical information

48
xSeries 200 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
1
Slots
Supported
2, 3
-
Storage Controllers
4, 5
37L6091 ServeRAID-4L Ultra160 SCSI Controller
6
Full 64-bit 2 ... 5
37L6080 ServeRAID-4M Ultra160 SCSI Controller
7
Full 64-bit 2 ... 5
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller
8
Full 64-bit 2 ... 5
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller
9
Half 64-bit 2 ... 5
19K4646 PCI Wide Ultra160 SCSI Adapter
10
Half 32-bit 2 .. . 5
02K3454 PCI Fast/Wide Ultra SCSI Adapter
11
Half 32-bit 2 ... 5
24P2585 IDE 100 RAID Controller by AMI
12
Half 32-bit 2 .. . 5
Networking
13
Ethernet
14
09N9901 10/100 EtherLink Server Adapter by 3Com
15
Half 32-bit 1 ... 5
19K 4401 Netfinity Gigabit Ethernet Adapter (copper)
18
Half 64-bit 1 ... 5
06P3601 10/100 Ethernet Server Adapter
15
Half 32-bit 1 ... 5
06P3701 Gigabit Ethernet SX Server Adapter (fiber)
18
Half 64-bit 1 ... 5
22P4901 10/100 Dual Port Server Adapter
15
Half 64-bit 1 ... 5
To ke n R i n g
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
15, 18
Half 32-bit 1 ... 5
34L5001 16/4 Token-Ring PCI Management Adapter
15
Half 32-bit 1 .. . 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter
15
Half 32-bit 1 ... 5
Communications
16
33L4618 V.90 PCI Data/Fax Modem Half 32-bit 2 ... 5
37L14xx Serial I/O SST 8, 16 and 128 Port Adapters
17
Half 32-bit 2 ... 5
1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot.
2. The xSeries 200 has five full-length, 33MHz PCI expansion slots. The number of available slots is model specific.
3. The Ultra160 SCSI controller shipped standard in SCSI models is installed in slot three.
4. xSeries 200 SCSI models include a standard single-channel Ultra160 SCSI adapter with a five-drop, multimode terminated LVD SCSI Cable. All models include dual IDE connectors. IDE
models require an optional SCSI PCI adapter for SCSI functionality. See At-A-Glance for model attributes
5. Storage controllers are supported in slots two through five only. Slots two and four and slots three and five are paired so that they support only the same type of adapter, e.g., if a storage
controller is installed in slot two, installing only another storage controller in slot four is recommended. Thus, a networking adapter should not be installed in slot four when a storage controller
is installed in slot two. (Slot one is next to the AGP video adapter, and slot five is the farthest from the processors.)
6. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
7. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external 0.8mm VHDCI
Ultra160 connectors.
8. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connections are 0.8mm VHDCI.
9. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one external
Ultra160 connection. External connectior is 0.8mm VHDCI.
10. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. Only one of the two connectors may be utilized.
11. PCI Fast/Wide Ultra SCSI Adapter (P/N 02K3454) provides one external 68-pin high density connector that supports external SCSI devices such as tape enclosures.
12. Supported only in IDE models. Dual channel adapter includes two connectors, supporting one ATA-100 HDD per channel. Two 18in ATA-66 cables ship with the option. Allows RAID 0 and
RAID 1 configurations.
13. xSeries 200 includes an integrated full-duplex, 10/100Mbps Ethernet controller. Networking adapters are supported in slots one through five. Slots two and four and slots three and five are
paired so that they support only the same type of adapter, e.g., if a networking adapter is installed in slot three, only another networking adapter should be installed in slot five. Thus, a storage
controller should not be installed in slot five when a networking adapter is installed in slot three.
14. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions
provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. The onboard Ethernet is Intel-based, which is compatible with
the three Intel-based optional Ethernet adapters (P/N 06P3601, 06P3701, 2 2 P4901) .
15. Wake on LAN™ is supported for this option when installed in slots one through five (refer to limitation explained in the footnotes associated with the Storage Controllers and Networking
headings in the table).
16. xSeries 200 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A software compatible) and one high-speed parallel port supporting devices using
SSP/EPP/ECP protocols adhering to the IEEE 1284 Standard.7.
17. See Appendix E for details on Serial I/O options and configuration limitations.
18. Not supported on machine type 8479 models.
Slot 4- 33 MHz, 32-bit, 5 V or Universal Slot 5- 33 MHz, 32-bit, 5 V or Universal
All Slots-Full Length
Slot 1- 33 MHz, 32-bit, 5 V or Universal
Slot 3- 33 MHz, 32-bit, 5 V or Universal
External Connector Access
S3 AGP video adapter
1
1. xSeries 200 ships standard with the
S3 AGP video adapter. Alternate video
adapters are not supported.
Slot 2- 33 MHz, 32-bit, 5 V or Universal