Technical information

IBM XSERIES 330 ICA

For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01

Part Number Description

Rack and NetBAY

1, 2

Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported

devices.

Keyboard and Mouse

06P4792 Cable Chain Technology Cable Kit

28L3644 Space Saver II Keyboard

5, 6

28L3621 Preferred Keyboard (stealth black)

28L3673 Sleek 2-button Stealth Black Mouse

1. xSeries 330 ICA is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options

section.

2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section. If non-IBM racks are to be

used, assure that both the front and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed

servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained between the front door and the system unit’s front bezel. The rear

door must maintain the same or greater clearance.

3. xSeries 330 ICA supports rack configurations only and ships without a keyboard or mouse.

4. A Cable Chain Technology (C2T) Cable Kit (P/N 06P4792) is required for the attachment of console devices to one or multiple

chained xSeries 330s. The kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard. mouse and monitor as well as a 2M

(6.5ft) chaining cable for connecting two xSeries 330s together when the standard 260mm (10in) chaining cable is not long enough. A

maximum of 42 xSeries 330s are supported in a single chain. No more than one C2T Cable kit may be used. If the last server in the

chain is connected to a console switch rather than directly to a monitor, a console cable (P/N 09N4293 or 94G7447) is required in

addition to the C2T Kit.

5. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position.

6. Advanced TrackPoint IV features are not available on IBM xSeries or Netfinity systems.

7. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel

display.