Technical information

30
xSeries 130 / 135 Power, Monitors & Accessories
Part Number Description
Power
1
Uninterruptible Power Supply (UPS)
2
94G6674 APC Smart-UPS 1400RMB
3
94G6676 APC Smart-UPS 3000RMB
3
37L6861 APC Smart-UPS 5000RMB
4
Monitors
5
06P4792 Cable Chain Technology Cable Kit
6
6331N2N E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
7
63324HN E74 Color Monitor 17in (406mm, 16in Viewable Image Size), stealth black
7
66274AN G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
7
9511AG4 T540 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black
8
1. The xSeries 130 /135 includes a worldwide, voltage sensing 200W power supply with auto restart and two 9ft line cords. One line
cord contains a 110V NEMA 5-15P connector while the other contains an IEC 320 C14 for attachment to a high voltage PDU or UPS.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See Rack Cabinets and Options section for supported IBM racks.
4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.
5. The xSeries 130 / 135 uses an SVGA controller (S-3 Savage4 chipset) with 8MB of video memory.
6. A Cable Chain Tech nology (C2T) Cable Kit (P/N 06P4792) is available for models 1YX, 1XX, 5DX and 5CX for attachment of console
devices to one or multiple chained systems if the standard breakout cable (265mm/10in) is not long enough. Chaining technology is
not applicable to models 24X and 25X. A short chaining cable is provided standard with models 5DX and 5CX.
The C2T Cable Kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard, mouse and monitor as well as a 2M (6.5ft)
chaining cable for connecting two xSeries systems together (models 1YX and 1XX) or for extending the distance requirement for
models 5DX and 5CX if the standard 260mm (10in) chaining cable is not long enough. A maximum of 42 xSeries 130/135s are
supported in a single chain. No more than one C2T Cable Kit may be used. If the last server in the chain is connected to a console
switch rather than directly to a monitor, a console cable (P/N 09N4293 or 94G7447) is required in addition to the C2T Kit.
7. Installation within a rack requires optional Monitor Compartment (P/N94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Rack and NetBAY
1
Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported
devices.
Keyboard and Mouse
2
06P4792 Cable Chain Technology Cable Kit
3
28L3644 Space Saver II Keyboard
4
28L3621 Preferred Keyboard (stealth black)
5
28L3673 Sleek 2-button Stealth Black Mouse
1. xSeries 130 / 135 are housed in a 19in rack-mountable drawer and require one of the racks listed in the Rack Cabinets and Options
section.
2. xSeries 130/135 supports rack configurations only and ships without a keyboard or mouse.
3. A Cable Chain Technology (C2T) Cable Kit (P/N 06P4792) is available for models 1YX, 1XX, 5DX and 5CX for attachment of console
devices to one or multiple chained systems if the standard breakout cable (265mm/10in) is not long enough. Chaining technology is
not applicable to models 24X and 25X. A short chaining cable is provided standard with models 5DX and 5CX.
The C2T Cable Kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard, mouse and monitor as well as a 2M (6.5ft)
chaining cable for connecting two xSeries systems together (models 1YX and 1XX) or for extending the distance requirement for
models 5DX and 5CX if the standard 260mm (10in) chaining cable is not long enough. A maximum of 42 xSeries 130/135s are
supported in a single chain. No more than one C2T Cable Kit may be used. If the last server in the chain is connected to a console
switch rather than directly to a monitor, a console cable (P/N 09N4293 or 94G7447) is required in addition to the C2T Kit.
4. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.