Technical information

29
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
XSERIES 130/135
IDE Models
IDE Models
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
Max
Qty
1
1
89mm (3.5in) SL Yes HDD IDE HDDs
1
2 89mm (3.5in) SL Ye s Open 19K4461
20.4GB 7200rpm ATA-100 (EIDE)
HDD
7200 SL 1, 2 2
1. Boot drive should be located in bay 1.
22P7157
40GB 7200rpm ATA-100 (EIDE)
HDD
7200 SL 1, 2 2
1. Mixing of IDE and SCSI hard disk drives is not supported.
xSeries 130 / 135 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
Slots
Supported
2
Networking
1
19K4401 Netfinity Gigabit Ethernet Adapter (copper)
3
Half 64-bit 1, 2
1. xSeries 130 / 135 includes dual full-duplex, 10/100Mbps Ethernet controllers.
2. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in
a 33MHz slot.
3. Not supported on models 8654-1YX, 1XX.
Floppy / CD-ROM
Bay 1 Bay 2
Slot 1- 33 MHz, 64-bit, 5 V or Universal, Full Length Slot 2- 33 MHz, 64-bit, 5 V or Universal, Half Length
Exterior
Connector
Access