Technical information

28
xSeries 130 / 135 Hard Disk Drive (HDD) Storage
SCSI Models
Total Int
Storage
1
10,000RPM HDDs
9.1GB
(P/N 37L7204)
18.2GB
(P/N 37L7205)
36.4GB
(P/N 37L7206)
9.1G B
2
1 - -
18.2GB
3
-1-
27.3GB 1 1 -
36.4GB - 2 -
45.5GB 1 - 1
54.6GB - 1 1
72.8GB
max
4
- - 2
This table does not represent all possible HDD configurations.
1. Select a total storage row then add the quantity of HDDs from all columns. Total
Internal Storage listed is within +/- 0.2GB unless otherwise noted.
2. A 9.1GB 10,000rpm HDD is standard in models 8654-1YX, 1XX.
3. An 18.2GB 10,000rpm HDD is standard in models 8654-5CX, 5DX.
4. Requires removal of the standard HDD. Boot CD with software preload is shipped
with the system.
SCSI Models
SCSI Models
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
Max
Qty
1
1
HS SL Yes HDD
Ultra160 Hard Disk
Drives (HDD)
2 HS SL Ye s Open 37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10000 SL 1 ... 2 2
1. Boot drive should be located in bay 1. 37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10000 SL 1 ... 2 2
37L7206
36.4GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10000 SL 1 ... 2 2
IDE Models
Total Int
Storage
1
7200RPM IDE HDDs
2
20.4GB
19K4461
40GB
2 2P71 57
20.4GB Standard on EIDE models -
40.8GB 1 -
60.4GB - 1
80GB
3
-2
This table does not represent all possible HDD configurations. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
1. Select a total storage row then add the quantity of HDDs from all columns to the
standard HDD.
2. The xSeries 130/135 dual integrated EIDE controllers support a maximum of three
IDE devices per machine including one CD-ROM and two IDE HDDs.
3. Requires removal of the standard 20.4GB IDE HDD. Boot CD with software preload
is shipped with the system.
Floppy / CD-ROM
Bay 1 Bay 2