Technical information

INTELLISTATION R PRO
21
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
Part Number Description
Rack and NetBAY
1, 2
Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported
devices.
Keyboard and Mouse
3, 4
28L3644 Space Saver II Keyboard
5, 6
01K1260 TrackPoint IV 104-key Black Keyboard
6
28L3673 Sleek 2-button Stealth Black Mouse
1. InstalliStation R Prois housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options
section for the xSeries 330.
2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section for xSeries 330. If non-IBM
racks are to be used, assure that both the front and rear doors offer a minimum of 48% open area uniformly distributed and in line with
installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained between the front door and the system unit’s front bezel.
The rear door must maintain the same or greater clearance.
3. IntelliStation R Pro supports rack configurations only, but ships with a standard keyboard and mouse.
4. Third-party sourcing is required for connecting the rack-mounted R Pro system to remote workstation console devices. Keyboard,
video and mouse (KVM) connectivity hardware for IntelliStation R Pro is not available through IBM but can be purchased through
various vendors including the following:
AmuletHotKey in London, England on the Web at www.amulet-hotkey.com or telephone [phone].
Wey Technology AG in Rotkreuz, Germany at [e-mail] (E-mail) or telephone [phone].
IBM makes no representations or warranties with respect to non-IBM products.
These products are offered and waranted by third parties, not IBM.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position.
6. Advanced TrackPoint IV features are not available on IntelliStation R Pro systems.