Technical information

INTELLISTATION R PRO
19
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
IntelliStation R Pro Memory
To t a l
Memory
1
Quantity of RDIMMs Added
256MB
(1 x 256)
Models
128MB
(10K0018)
256MB
(10K0020)
51 2 M B
(10K0022)
1GB
(33L3326)
384MB 1 - - -
512MB 2 or 1 - -
640MB 3 - - -
Part
Number
Memory Description
1
768MB - 2 or 1 -
10K0018 128MB PC133 ECC SDRAM RDIMM II
1024MB - 3 - -
10K0020 256MB PC133 ECC SDRAM RDIMM II 1280MB - - 2 or 1
10K0022 512MB PC133 ECC SDRAM RDIMM II
1792MB - - 3 -
33L3326 1GB PC133 ECC SDRAM DIMM 2048MB - - 4
2
or 2
1. Memory RDIMMs must be installed in sequence from RDIMM connector
1 through connector 4. RDIMM size is not relevant.
2304MB - - - 2
3328MB - - - 3
4096MB (max) - - - 4
2
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network operating systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
IntelliStation R Pro Hard Disk Drive (HDD) Storage
SCSI Models
Total Int
Storage
1
10,000RPM HDDs 15,000RPM HDDs
18.2GB
00N8208
36.4GB
00N8209
73.4GB
06P5752
18.2GB
19K0658
18.2GB (Standard on SCSI models)
36.4GB 1 - - 1
54.6GB - 1 - -
72.8GB
2
- 2 - -
91.6GB - - 1 -
14 6.8G B
(max)
2
- - 2 -
This table does not represent all possible HDD configurations.
1. Select a total storage row then add the quantity of HDDs from all columns within an RPM range to the
standard HDD. Total Internal Storage listed is within +/- 0.2GB unless otherwise noted.
2. Requires replacing standard HDD.
EIDE Models
To t a l
Internal
Storage
1
7200RPM EIDE HDDs
2
20.4GB
19K4461
40GB
22P7157
20.4GB (Std on EIDE models) -
40.8GB 1 -
60.4GB - 1
80GB
3
- 2
This table does not represent all possible HDD configurations.Total Internal
Storage listed is within +/-0.2GB unless otherwise noted.
1. Select a total storage row then add the quantity of HDDs from both columns
to the standard HDD.
2. The R Pro dual integrated EIDE controllers support a maximum of three IDE
devices per machine including one CD-ROM and two IDE HDDs.
3. Requires removal of the standard HDD.
RDIMM 4
RDIMM 3
RDIMM 2
RDIMM 1