Technical information

185
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
Updated 10/02/01
NETBAY RACK
POWER CONFIGURATOR
NetBAY Rack Power Configurator
US models EMEA models
Outlet
s
C19 C13 NEMA C19 C13
APC 1400RMB 00604
APC 3000RMB
00818
APC 5000RMB 28028
Outlets
C19 C13
Rack PDU 07
Server PDU
04
Front-end PDU 30
Outlets:
Possible Power Configurations:
P
D
U
P
D
U
Rack
Cabinet
P/S
P
D
U
up to 7
C13
Device/Unit
Single Rack PDU
PDU used as
UPS back-end
(2)
(1)
Rack PDU
7 outlets-C13
100-240Vac
15a
UPS
P
D
U
(5)
P/S
P/S
Units with
redundant p/s
P
D
U
(2)
(1)
Redundant Power
Distribution
Device/Unit
C13
C13C19
(6)
(3)
(1)
P
D
U
UPS
(3)
(6)
(2)
Redundant Power Distribution
with PDU and UPS
Units with
redundant p/s
(1)
P
D
U
UPS
(3)
(6)
(2)
Redundant Power Distribution
with PDU and UPS with PDU
Units with
redundant p/s
(1)
P
D
U
F
E
P
D
U
P
D
U
Rack
Cabinet
P
D
U
F
E
P
D
U
P
D
U
Typical Rack Power Configurations:
Simple -- three Rack PDUs
and one Front-end PDU (single
circuit, 21 outlets)
Redundant -- six Rack PDUs
and two Front-end PDUs (dual
circuit, 42 outlets)
P
D
U
F
E
P
D
U
P
D
U
(5)
(4)
(4)
Front-end PDU
3 outlets - C19
1 inlet - hardwired
Rack Rules:
Total PDUs (LV PDUs, HV PDUs, Rack PDUs, Server PDUs, FE PDUs) = 8
Total Server PDUs = 3
Total Front-end PDUs = 2
NOTES:
1. Each device/unit usually comes with a power cord. The PDU requires the power cord to have an
IEC 320-C14 plug. Order P/N 94G7448 (14ft) if appropriate cord is not provided by the device/unit.
2. Each PDU and UPS comes with a country-specific power cord.
3. Internal rack power cable provided with APC SmartUPS 5000 UPS.
4. Internal rack power cable provided with Front-end PDU.
5. Line cord provided with Front-end PDU.
6. UPS comes with a country-specific power cord or a terminal block.
7. Customer responsible to provide a dedicated circuit for each line cord protected with an
appropriate circuit breaker.
8. P/S = Power Supply.