Technical information

148
.
xSeries 380 Hard Disk Drive (HDD) Storage
Bay For m
Factor
Height Front
Access
Usage
Part
Number
External Storage Expansion
Units
1
Form Factor
1
133mm
(5.25in)
SL yes CD-ROM 35311RU EXP300 Storage Expansion Unit
2
Rack (3U)
2
89mm
(3.5in)
SL yes Diskette 35601RU
FAStT EXP500 Storage Expansion
Unit
3
Rack (3U)
3, 4
89mm
(3.5in)
HH
1
yes
Std hot-swap
HDDs
35421RU FAStT200 Storage Server
4, 5
Rack (3U)
1. The hot-swap HDDs supported for installation in bays three and four are
slim-line (SL). Half-high (HH) height is required to accommodate the carrier in
which the HDDs are installed before insertion into the bays.
35422RU FAStT200 HA Storage Server
4
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
Note: xSeries 380 ships standard with a 36.4GB, 10,000RPM hot-swap HDD
installed in each of the two internal HDD bays.
1. xSeries 380 includes an integrated dual-channel Ultra160 storage controller.
External storage is supported through the external 0.8mm VHDCI connector or a
supported SCSI controller. To configure an external SCSI storage device, refer to
Appendix D: Cables - Storage Units - Controllers to confirm the preferred controller
supports the desired External Storage Expansion Unit and to select a supported
cable. For HDD or other expansion unit options, see the specific expansion unit
section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions
Overview section.
2. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W
redundant power supplies, each with its own power cord. An optional RAID
adapter is required to support external HDD storage. Refer to ServerProven test
results for supported RAID options at www.pc.ibm.com/us/compat. Select x380
from the Fast Access pulldown menu and click Go. Scroll to the bottom of the
page, click on IBM ServerProven Program Participants, then select AMI.
MegaRAID1600 is supported in this system. IBM makes no representations or
warrantees with respect to non-IBM products. These products are offered and
warranted by third parties, not IBM.
3. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap
350W power supplies, each with its own power cord.
4. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power
supplies, each with its own power cord.
5. Can be upgraded to FAStT200 HA Storage Server through the addition of a
FAStT200 Redundant RAID Controller (P/N 19K1121).
xSeries 380 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
4
Slots
Supported
Hot-
Plug
5
PCI Voltage
Key
MHz
Storage Controllers
1, 2
19K 464 6 PCI Wide Ultra160 SCSI Adapter
3
Half 32-bit 1 ... 8 - Universal 66
Fibre Storage Controllers and Options
6
00N6881 Netfinity FAStT Host Adapter Half 64-bit 1 ... 8 X Universal 66
35521RU FAStT500 Storage Server - - - - - -
35421RU FAStT200 Storage Server - - - - - -
35422RU FAStT200 HA Storage Server - - - - - -
Networking
7
Ethernet
8
06P3601 10/100 Ethernet Server Adapter
9
Half 32-bit 1 ... 8 X Universal 33
06P3701 Gigabit Ethernet SX Server Adapter (fiber) Half 64-bit 1 ... 8 X Universal 66
1. xSeries 380 includes an integrated dual-channel Ultra160 storage controller. External storage is supported through the external 0.8mm VHDCI connector or a supported optional PCI SCSI
controller.
2. An optional RAID adapter is required to support external HDD storage. Refer to ServerProven test results for supported RAID options at www.pc.ibm.com/us/compat. Select x380 from the
Fast Access pulldown menu and click Go. Scroll to the bottom of the page, click on IBM ServerProven Program Participants, then select AMI. MegaRAID1600 is supported in this system. IBM
makes no representations or warrantees with respect to non-IBM products. These products are offered and warranted by third parties, not IBM.
3. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. Only one of the two connectors may be utilized.
4. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot. 33MHz adapters will reduce
66MHz buses to 33MHz.
5. All eight slots are hot-plug capable. For Network Operating System support, access www.pc.ibm.com/us/compat.
6. See Fibre Channel Solutions Overview section for additional configuration information.
7. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions
provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. The two Intel-based optional Ethernet adapters
(P/N 06P3601, 06P3701) provide compatible intermediate drivers for failover support.
8. xSeries 380 includes an integrated 10/100 Intel-based Ethernet adapter that supports Wake on Lan.
9. The Wake on LAN function of this option is not supported by this server.
LS-120 Diskette
1
CD-ROM
HDD HDD
1. LS-120 slim-line diskette drive supports a diskette with
capacity of 120MB.