Technical information

IBM XSERIES 350
133
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
xSeries 350 Power, Monitors & Accessories
Part Number Description
Power
1
37L6880 270W Hot-Swap Redundant Power Supply
2
Uninterruptible Power Supply (UPS)
3
94G6674 APC Smart-UPS 1400RMB
4
94G6676 APC Smart-UPS 3000RMB
4
37L6861 APC Smart-UPS 5000RMB
5
Monitors
6
6331N2N E54 Color Monitor 15in (350mm, 13.8in Viewable Image), stealth black
7
63324HN E74 Color Monitor 17in (406mm, 16in Viewable Image), stealth black
7
66274AN G78 Color Monitor 17in (406.4mm, 16in Viewable Image), stealth black
7
9511AG4 T540 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black
8
1. xSeries 350 systems include a single 270W, hot-swap power supply and two 9ft power cords, one high voltage IEC 320-C13
and one low voltage IEC 320-C13 to NEMA 5-15P. N+1 power supply redundancy may be achieved with the addition of an
optional 270W Hot-Swap Redundant Power Supply (P/N 37L6880). Redundancy for configurations of greater than 270W
requires installation of a second optional power supply, i.e., a total of three 270W power supplies. To assist in determining when
an additional power supply is required to preserve redundancy, a “Non-Redundant LED” is a standard feature of the xSeries
350.
The following table is provided as a reference The table shows an example of a maximum configuration that can be supported
by a single 270W power supply. Any additional power draw would require another power supply. Redundancy for the
configuration displayed requires a second 270W power supply.
2. 270W Hot-Swap Redundant Power Supply (P/N 37L6880) includes a single low voltage 9ft power cord.
3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
4. Height is 3U. See Rack Cabinets and Options section for supported IBM racks.
5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.
6. xSeries 350 uses an SVGA controller (S3 Savage4 chipset) with 8MB of video memory.
7. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack
Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number Description
Rack and NetBAY
1
Refer to the Rack Cabinets and Options section for information concerning
IBM racks and rack-supported devices.
Keyboard and Mouse
2
28L3644 Space Saver II Keyboard
3, 4
01K1260 TrackPoint IV 104-Key Black Keyboard
4, 5
28L3621 Preferred Keyboard (stealth black)
5
28L3673 Sleek 2-Button Stealth Black Mouse
1. xSeries 350 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the
Rack Cabinets and Options section.
2. xSeries 350 supports rack configurations only and ships without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in “ready-to-
use” position.
4. Advanced TrackPoint IV features are not available on IBM xSeries or Netfinity systems.
5. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share
a keyboard tray with a flat panel display.
Number of
Power Supplies
System Configuration Supported
Nonredundant
Up to two processors
1 Up to three PCI adapters
Up to three HDDs
Up to eight memory RDIMMs