Technical information

116
12. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant
solutions provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. The onboard Ethernet is
AM D-bas e d. T hre e of the o ptiona l P CI Eth erne t a dapters liste d are In tel-b a sed (P/ N 06P 36 01, 0 6P3701, 22P 49 01).
13. The Wake on LAN function of this option is not supported by this server.
14. xSeries 340 includes two USB ports, two serial and one parallel port.
15. Due to homologation variances, modem availability may differ by country.
16. See Appendix E for details on Serial I/O Options and configuration limitations.
17. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 340 works with Netfinity Director to provide significant system management
function. When used with optional Netfinity Advanced System Management PCI Adapter (P/n 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N
03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
18. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter, which requires a separate power source. Provides an
integrated 10/100 Ethernet port and a PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
19. A maximum quantity of one is supported.
20. Required for all xSeries servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or
modem connection. Optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) includes the contents of this option. Up to 12 service processors may be
interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for
each interconnection..
21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
23. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot.
xSeries 340 Power, Monitors & Accessories
Part Number Description
Power
1
37L6880 270W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)
2
94G6674 APC Smart-UPS 1400RMB
3
94G6676 APC Smart-UPS 3000RMB
3
37L6861 APC Smart-UPS 5000RMB
4
Monitors
5
6331N2N E54 Color Monitor 15in (350mm, 13.8in viewable image), stealth black
6
63324HN E74 Color Monitor 17in (406mm, 16in viewable image), stealth black
6
66274AN G78 Color Monitor 17in (406.4mm, 16in viewable image), stealth black
6
9511AG4 T540 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black
7
1. xSeries 340 systems include a single 270W, hot-swap power supply and two 9ft power cords, one high voltage IEC 320-
C13 to IEC 320-C14 and one low voltage IEC 320-C13 to NEMA 5-15P. Power supply redundancy can be achieved with the
addition of optional 270W Hot-Swap Redundant Power Supply (P/N 37L6880).
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See Rack Cabinets and Options section for supported IBM racks.
4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.
5. xSeries 340 uses an SVGA controller (S3 Savage4 chipset) with 8MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack
Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number Description
Rack and NetBAY
1
Refer to the Rack Cabinets and Options section for information concerning
IBM racks and rack-supported devices.
Keyboard and Mouse
2
28L3644 Space Saver II Keyboard
3, 5
01K1260 TrackPoint IV 104-Key Black Keyboard
4, 5
28L3621 Preferred Keyboard (stealth black)
4
28L3673 Sleek 2-Button Stealth Black Mouse
1. xSeries 340 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the
Rack Cabinets and Options section.
2. xSeries 340 supports rack configurations only and ships without a mouse or keyboard.
3. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-
use position.
4. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot
share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM xSeries or Netfinity systems.