Technical information

114
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
1
Max
Qty
1
-
89mm
(3.5in)
- Yes Diskette
Ultra160 HDDs
- 133mm (5.25in) - Ye s
IDE CD-
ROM
37L7204
9.1GB 10K-4 Ultra160 SCSI
Hot-Swap SL HDD
10000 SL 1 ... 6 6
1 ... 3 HS SL Yes Open 37L7205
18.2GB 10K-4 Ultra160 SCSI
Hot-Swap SL HDD
10000 SL 1 ... 6 6
A, B
133mm
(5.25in)
HH
1
Ye s Open 37L7206
36.4GB 10K-4 Ultra160 SCSI
Hot-Swap SL HDD
10000 SL 1 ... 6 6
4 ... 6
2
HS SL Yes Open 19K0655
9.1GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000 SL 1 ... 6 6
1 Two half-high (HH) bays can be combined to support a single full-high (FH)
device. By installing xSeries 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N
33L5050), bays A and B are transformed into three SL hot-swap
bays 4 ... 6.
2. To enable bays 4 ... 6, optional xSeries 3-Pack Ultra160 Hot-Swap
Expansion Kit (P/N 33L5050) is required.
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000 SL 1 ... 6 6
06P5756
73.4GB 10Krpm Ultra160 SCSI
Hot-Swap SL HDD
10000 SL 1 ... 6 6
Associated Options
33L5050
IBM 3-Pack Ultra160 Hot-Swap
Expansion Kit
2
- 3 x SL 4 ... 6 -
External Storage
Expansion Units
3
Form Factor
35311RU
EXP300 Storage Expansion
Unit
4
Rack (3U)
35601RU
FAStT EXP500 Storage
Expansion Unit
5
Rack (3U)
35421RU FAStT200 Storage Server
6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server
6
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. xSeries 340 ships with Bays 1 ... 3 enabled. To enable installation of greater than three HDDs requires IBM
3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
2. IBM 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) includes a hot-swap backplane and
associated components for two cabling options. The backplane may be cabled directly to the second
integrated SCSI channel or be supported by the same SCSI channel as the standard backplane through the
use of an included repeater card.
3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables -
Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit
and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit
section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies,
each with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own
power cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
Diskette
CD-ROM
RM A
RM B
HS 4
HS 5
HS 6
Removable Media
(RM)
1 2 3
Hot-Swap
(HS)