Technical information

105
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
IBM XSERIES 330
External Storage
Expansion Units
5
Form Factor
35311RU
Netfinity EXP300 Storage
Expansion Unit
6
Rack (3U)
35601RU
Netfinity FAStT EXP500 Storage
Expansion Unit
7
Rack (3U)
35421RU FAStT200 Storage Server
8, 9
Rack (3U)
35422RU FAStT200 HA Storage Server
8
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. The xSeries 330 dual integrated EIDE controllers support a maximum of three IDE devices per machine
including one CD-ROM and two IDE hard disk drives. IDE HDDs are supported only on IDE models.
2. Mixing of IDE and SCSI hard disk drives is not supported.
3. Nonhot-swap HDDs are supported only in fixed disk models.
4. Hot-swap HDDs are supported only in hot-swap models.
5. xSeries 330 does not include an external SCSI connector. To configure a SCSI storage device, select an
optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller
supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other
expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the
Fibre Channel Solutions Overview section.
6. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
7. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
8. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
9. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).