Technical information

103
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.Updated 10/02/01
IBM XSERIES 330
xSeries 330 contains a DASD backplane supporting two hot-swap, SCA-2 compliant drive bays. The backplane is connected to the internal connector of the
integrated Ultra160 SCSI controller through a 16-bit LVD SCSI cable. If internal RAID is required, the cable can be attached to the internal connector of the optional
RAID adapter. The cable is of sufficient length to attach to adapters in slot one but not slot two.
xSeries 330 nonhot-swap models contain either of the following:
• 20.4GB EIDE HDD cabled directly to an integrated EIDE controller through a two-drop cable that can support up to two EIDE HDDs
• 18.2GB 10,000RPM Ultra160 SCSI HDD cabled directly to the Ultra160 SCSI controller through a terminated two-drop LVDS SCSI cable that can
support up to two HDDs.
In configurations where external SCSI device attachment is required, a supported SCSI adapter or ServeRAID controller must be installed.
xSeries 330 Memory
To t a l
Memory
1
Quantity of RDIMMs Added
256MB
(1 x 256)
Models
128MB
(10K0018)
256MB
(10K0020)
512MB
(10K0022)
1GB
(33L3326)
384MB 1 - - -
512MB 2 or 1 - -
640MB 3 - - -
Part
Number
Memory Description
1
768MB - 2 or 1 -
10K0018 128MB PC133 ECC SDRAM RDIMM
1024MB - 3 - -
10K0020 256MB PC133 ECC SDRAM RDIMM 1280MB - - 2 or 1
10K0022 512MB PC133 ECC SDRAM RDIM M
1792MB - - 3 -
33L3326 1GB PC133 ECC SDRAM RDIMM 2048MB - - 4
2
-
1. Memory RDIMMs must be installed in sequence from RDIMM connector 1
through connector 4. RDIMM size is not relevant.
2304MB - - - 2
3328MB - - - 3
4096MB (max) - - - 4
2
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network operating systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
xSeries 330 Internal SCSI Cabling
xSeries 330 Hard Disk Drive (HDD) Storage
SCSI Models
Total Int
Storage
1
10,000RPM HDDs 15,000RPM HDDs
9.1GB
(37L7204,
00N8207)
18.2GB
(37L7205,
00N8208)
36.4GB
(37L7206,
00N8209)
73.4GB
(06P5752,
06P5756)
9.1GB
(19K0655)
18.2GB
(19K0656,
19K0658)
0GB Standard on some base models
9.1G B 1 - - - 1 -
18.2GB
2
-1
2
--2 -
36.4GB - - 1 - - 2
72.8GB - - 2 - - -
73.4GB - - - 1 - -
146.8GB
(max)
3
---2--
This table does not represent all possible HDD configurations.
1. Select a total storage row then add the quantity of HDDs from all columns within an RPM range. Total Internal Storage listed
is within +/- 0.2GB unless otherwise noted.
2. Some SCSI models support only nonhot-swap HDDs. Model 8674-13X ships standard with one 18.2GB fixed disk HDD (P/N
00N8208).
3. Requires replacing standard HDD in nonhot-swap SCSI models.
RDIMM 4
RDIMM 3
RDIMM 2
RDIMM 1