Specifications

63
Updated
17/10/00
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM  Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Netfinity 3000 Power, Monitors, Accessories
Part Number Description
Power
1
Uninterruptible Power Supply (UPS)
2
SUP072Y APC Smart-UPS 700
SUP102Y APC Smart-UPS 1000
Monitors
T3347xx
3
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
31H2Nxx
3
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
T32N3xx
3
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
T274Axx
3
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
11AG1xx
3
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
1.Netfinity 3000 includes a 330 W voltage sensing power supply.
2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.
3. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa,
CH=Switzerland, UK=UK, EU=Europe.
Netfinity 3000 Tape Options
Part Number Description Bays
Supported
SCSI Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
ConverterIncl.
Ext. Tape
Enclosures
1
09N4041 12/24GB DDS/3 4mm Internal SCSI Tape Drive
2,4
28
89 mm (3.5”)
HH or 133 mm
(5.25”) HH
Y Y 10L7440
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
3,5
2 16 Ultra2 LVD
89 mm (3.5”)
HH or 133 mm
(5.25”) HH
Y N/A 10L7440
09N4042 10/20GB NS Internal SCSI Tape Drive
2,4
2, 3 8
89 mm (3.5”)
SL or 133 mm
(5.25”) HH
Y Y 10L7440
09N4040 20/40GB DLT Internal SCSI Tape Drive N/A 8
133 mm
(5.25”) FH
N Y 03K8705
9
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
6
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
7
- 16 Desktop N N -
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
4,8
- 16 LVD/SE Internal Y N -
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE External Y N
10L7440,
03K8705
Note: Models P/N 780UExx and above include an Ultra2 SCSI controller with a four-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to
single-ended performance. Models P/N 771UExx and below include an Ultra SCSI controller with a four-drop,16-bit single-ended terminated SCSI cable. Support of LVD devices attached to this cable limits
the LVD device to a maximum of Ultra SCSI bus speeds. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode
LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine external cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, and then refer to Appendix D:
Cables - Storage Units - Controllers.
2. This single-ended device will limit the SCSI bus of Models P/N 780UExx and above to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide Ultra160 SCSI Adapter P/N 19K4646
which includes a five-drop multi-mode LVD SCSI cable.
3. Models P/N 771UExx and below will support LVD tape drives attached to the standard cable, however, bus speeds will be restricted to Ultra SCSI or below. For LVD support, optional PCI Wide Ultra160
SCSI Adapter P/N 19K4646 may be installed (includes required terminated LVD cable).
4. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N 10K2340
is required, for attachment of the tape drive to the standard controller.
5. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N 10K2340
is required, for attachment of the tape drive to the standard controller. For LVD support, optional PCI Wide Ultra160 SCSI Adapter P/N 19K4646 may be installed (includes required terminated LVD cable).
6. Provides a black desktop 133-mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires either tape drive self termination or 68-pin External Multimode LVD/SE SCSI Terminator P/N
00N7956.
8. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
9. Requires 68-pin External Multimode LVD/SE SCSI Terminator P/N 00N7956.
NOTE: Additional tape drive information can be found in Appendix A: Tape Drive Attributes.