Specifications

ManualsBrandsHP ManualsComputer equipmentLH4r - NetServer - 256 MB RAM

Updated

17/10/00

Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM

Marketing Representative for assistance with your specific configuration requirements.

Workgroup Internet Server

An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The

main difference is that an Internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (Firewall). In the case of an

Internet server, the server itself talks mostly to just one client, the Internet Service Provider(ISP), instead of many clients like a file server does.

With this in mind, the IBM Netfinity 1000 (IDE) was selected to provide an affordable price point for the growing Internet server market with Pentium III processing, 128MB of

system memory (expandable to 768MB), integrated 100/10 Ethernet controller, high-performance storage, and power protection with an APC Smart-UPS.

The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.

File & Print Server

A small business or departmental server is usually required to perform all typical server functions while servicing up to 50 users in a normal workgroup computing environment, but

doesn’t require the high-end performance and fault tolerance properties of larger servers. The sample configuration above consists of an IBM Netfinity 1000 IDE model with 128MB

of memory and 10.1GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space

to store a significant amount of data with additional internal storage expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet

connection. This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected from power surges and outages.

Netfinity 1000 Value Model Sample Configurations

Part Number Description Quantity

761YExx IBM Netfinity 1000 IDE Pentium III 700/256KB L2, 64MB ECC, 10.1GB 1

01K1130 64MB 100MHz ECC SDRAM DIMM

33L4958 10.1GB 7200rpm EIDE HDD 1

02K3454 PCI Fast/Wide Ultra SCSI Adapter

09N4042 IBM 10/20GB NS Internal SCSI Tape Drive 1

31H2Nxx E54 Color Monitor 15” (13.8” Viewable Image Size), stealth-black 1

SUP102Y APC Smart-UPS 1000 1

1. For a total of 128MB of system memory.

2. Includes a 16-bit SCSI Cable