Specifications

39
Updated
17/10/00
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM  Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
xSeries 240 / Netfinity 5600 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
09N4042 10/20 GB NS Internal SCSI Tape Drive
1
A, B 8
89 mm
(3.5”) SL or
133 mm
(5.25”) HH
Y Y 10L7440
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
2
A, B 16 Ultra2 LVD
89 mm
(3.5”) HH
or 133 mm
(5.25”) HH
Y N/A
10L7440,
03K8756
3
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
1
A, B 16
133 mm
(5.25”) HH
NN/A
10L7440
4
,
03K8756
09N4040 20/40 GB DLT Internal SCSI Tape Drive
1
A/B 8
133 mm
(5.25”) FH
N Y
03K8705
4
,
03K8756
00N7990 40/80 GB DLT Internal SCSI Tape Drive
2
A/B 16 Ultra2 LVD
133 mm
(5.25”) FH
NN/A
03K8705
4
,
03K8756
3
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
2
A, B 16 Ultra2 LVD
133 mm
(5.25”) HH
N N/A
10L7440
4
,
03K8756
3
Tape Autoloaders
00N79xx
11
DLT Tape Autoloader N/A 16 Desktop Y - -
00N7992 120/240GB DDS/4 Tape Autoloader
2
A/B 16 Ultra2 LVD
133 mm
(5.25”) FH N N/A 03K8756
3
External Tape Libraries
5
00N79xx
12
DLT Tape Library - 16
Desktop
orRack
Y- -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
6
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
7
16 Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
8
-16RackY N -
10L7113 NetMEDIA Systems Management Adapter
9
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext. Y N
10L7440,
03K8705
10K2340 Media BayTray and LVD Cable Kit
2,3,10
- 16 LVD Int. Y N -
Note: Netfinity 5600 includes a wide two-drop single-ended terminated cable which can be used for attachment of internal tape drives to the onboard Ultra2 controller when the hot-swap backplane is attached
to a RAID controller. If LVD support is required, an optional LVD cable must be ordered. An external Ultra2 SCSI port is available with a 0.8-mm VHDCI connector. External tape enclosures are supported
by the standard external SCSI port or PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8-mm VHDCI connector.
1. Non-RAID Configurations: Requires PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which contains a five-drop multi-mode terminated LVD SCSI cable.
2. RAID configurations: Configurations where the hot-swap backplane is cabled to a RAID controller, require the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and LVD
Cable Kit (P/N 10K2340) for support of LVD devices in LVD mode. Use of the included single-ended terminated cable with an LVD device will be limited to single-ended SCSI rules.
3. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340).
4. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
5. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
6. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator (P/
N 00N7956).
8. NetMEDIA Storage Expansion Unit EL (P/N 03K8756) is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays,
two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
9. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
10. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
11. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
12. Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.