Specifications
38
Updated
17/10/00
To access information on the World Wide Web, use address: http://www.pc.ibm.com
xSeries 240 / Netfinity 5600 Power, Monitors, Accessories
Part Number Description
Power
1,8
33L37xx
10
250 W Hot-Swap Redundant Power Supply
8
94G7448 Rack Power Cable Type C12 (3.7m)
8
Free Standing Uninterruptible Power Supply (UPS)
2
SUP102Y APC Smart-UPS 1000
SUP142Y APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)
2
14RIxxx
11
APC Smart-UPS 1400RMB
3
30RIxxx
11
APC Smart-UPS 3000RMB
3
37L6862 APC Smart-UPS 5000RMB
4
Monitors
5
T3347xx
9
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
31H2Nxx
9
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
T32N3xx
9
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
T274Axx
9
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
6
11AG1xx
9
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
7
1. xSeries 240 / Netfinity 5600 include two 250W hot-swap power supplies, each with its own standard country power cord. These standard power supplies are sufficient to
operate fully configured systems; however optional 250W Hot-Swap Redundant Power Supply P/N 33L37xx is required to preserve redundancy if any of the following are
exceeded:
Single Processor Configuration: Six SL hard disk drive (HDDs) and two PCI adapters (1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
e.g. To preserve power supply redundancy with 3 PCI adapters only 4 SL HDDs can be installed before an optional power supply is required.
Dual Processor Configuration: Four SL hard disk drives (HDDs) and two PCI adapters (1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
A “non-redundant” LED on the system unit will indicate when 250W has been exceeded. 250 W Hot-Swap Redundant Power Supply (P/N 33L37xx) includes a standard
country power cord which requires an additional power source. An independent power source such as a second UPS or second circuit is not required.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 240 / Netfinity 5600 use an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver
keyboard may coexist within the same keyboard tray.
8. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection of a Rack model to a high voltage UPS or PDU.
9. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
10. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United
Kingdom&Arabia.
11. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe.
Part Number Description
Conversion Kits
37L6858 5Ux24D Tower-to-Rack Kit
Rack and NetBAY
1,8
930842P Netfinity Enterprise Rack
930842X Netfinity Enterprise Expansion Cabinet
9306900 Netfinity Rack
9306910 Netfinity Rack (includes perforated front door)
9306200 Netfinity NetBAY22
37L6888 Netfinity Flat Panel Monitor Rack Mount Kit II
94G7448 Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
2
28L36xx
6
Space Saver II Keyboard
3, 5
28L36xx
7
Preferred Keyboard (stealth black)
4
28L3675 Sleek 2-Button Stealth Black Mouse
1. xSeries 240 / Netfinity 5600 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. See IBM Netfinity Rack Cabinet and Options
section for IBM rack supported devices.
2. Tower models include both a mouse and a keyboard. Rack models include neither.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
6. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where
‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The xSeries 240 / Netfinity 5600 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448
(type C12), must be ordered.