Specifications

24
Updated
17/10/00
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM  Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Part Number Description
Conversion Kits
09N4300 4Ux20D Tower-to-Rack Kit
6
Rack and NetBAY
1,6
930842P Netfinity Enterprise Rack
930842X Netfinity Enterprise Expansion Cabinet
9306900 Netfinity Rack
9306910 Netfinity Rack (Perforated Doors)
36L9703 Netfinity Rack Extension Kit
9306200 Netfinity NetBAY22
36L9702 NetBAY22 Rack Extension Kit
37L6888 Netfinity Flat Panel Monitor Rack Mount Kit II
94G7448 Rack Power Cable Type C12 (3.7m)
6
Keyboard and Mouse
2
28L36xx
5
Space Saver II Keyboard
3, 4
1 Rack installation of an xSeries 220 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed here. See IBM Netfinity Rack
Cabinet and Options section for IBM rack supported devices.
2. The xSeries 220 includes both a mouse and non-space saver keyboard.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English,
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
6. The xSeries 220 ships with a standard country power cord. If conversion to Rack format and connection to a high voltage UPS or PDU is being
carried out, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
xSeries 220 Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Terminatio
n Included
68/50-pin
Converter
Incl.
Ext. Tape
Enclosures
1
09N4041
12/24GB DDS/3 4-mm Internal SCSI
Tape Drive
2, 3
28
89 mm (3.5”) HH or
133 mm (5.25”) HH
YY
10L7440,
03K8756
09N4042 10/20GB NS Internal SCSI Tape Drive
2, 3
2, 4 8
89 mm (3.5”) SL or
133 mm (5.25”) HH
Y Y
10L7440,
03K8756
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
3
2
16 Ultra2
LVD
89 mm (3.5”) HH or
133 mm (5.25”) HH
YN/A
10L7440,
03K8756
4
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
5
- 8/16 Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
6
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
7
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE External Y N 10L7440
10K2340 Media Bay Tray and LVD Cable Kit
3,4,8
- 16 LVD Internal Y N -
Note: All models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to single-
ended performance. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode terminated LVD SCSI cable
and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to Appendix D:
Cables - Storage Units - Controllers.
2.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide ultra160 SCSI Adapter (P/N 19K4646) which
includes a five-drop multi-mode LVD SCSI cable.
3. For RAID configurations where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and LVD Cable Kit P/N
10K2340 is required, to allow attachment of a SCSI Tape Drive to the standard Ultra160 SCSI controller.
4. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 03K8756) requires replacement of the standard single-ended internal cables with one or more (depending on
configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for attachment to LVD
devices, single-ended SCSI rules and bus speeds apply.
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. NetMEDIA Storage Expansion Unit EL (P/N 03K8756) is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”)
bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also
included.
7. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in an Expansion Unit P/N 03K8756 to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes