Specifications

111
Updated
17/10/00
Netfinity EXP200 hot-swapping of HDDs is restricted to a HDD that is inactive or where a lighted fault LED is indicated. The EXP200 is not supported when
the SCSI channel of the SCSI adapter to which it is attached is split between internal devices and external devices. Each EXP200 must be attached to a
dedicated SCSI channel of a supported SCSI adapter. The standard EXP200 configuration is supported as a rack drawer and is not currently supported for
stacking directly on one another. It can be installed in a Netfinity NetBAY3 or NetBAY3E storage unit and stacked up to three units high, with a supported
server on top. In addition, it can be converted to a tower with the addition of a Netfinity EXP200 Rack-to-Tower Conversion Kit (37L5857). See Appendix D:
Cables- Storage Units- Controllers for supported controllers and cables. A single two meter cable is included with the EXP200.
Bay Form
Factor
Height Front
Access
Usage Bus Part
Number
Description RPM Height Bays
Supported
Max.
Qty.
Odd #s HS HH yes open 1
Even
#s
HS HH yes open 2
Ultra160 Hard Disk Drives (HDD)
1
37L7201
9.1 GB Ultra160 SCSI Hot-
Swap SL HDD
7200 SL 1...10 10
37L7202
18.2 GB Ultra160 SCSI Hot-
Swap SL HDD
7200 SL 1...10 10
37L7203
36.4 GB Ultra160 SCSI Hot-
Swap SL HDD
7200 SL 1...10 10
37L7204
9.1 GB 10K-4 Ultra160
SCSI Hot-Swap SL HDD
10,000 SL 1...10 10
37L7205 18.2 GB 10K-4 Ultra160 10,000 SL 1...10 10
37L7206
36.4 GB 10K-4 Ultra160
SCSI Hot-Swap SL HDD
10,000 SL 1...10 10
19K0655
9.1 GB 15K-rpm Ultra160
SCSI Hot-Swap HDD
15,000 SL 1...10 10
19K0656
18.2 GB 15K-rpm Ultra160
SCSI Hot-Swap HDD
15,000 SL 1...10 10
External Storage
Expansion Unit
Form Factor
00N6xxx
4
Netfinity EXP200 Storage
Expansion Unit
2, 3
Rack (3U)
37L5857
Netfinity EXP200 Rack-to-
Tower Conversion Kit
-
37L0xxx
5
Netfinity EXP200 350 W
Redundant Power Supply
3
-
94G7448
Rack Power Cable Type C12
(3.7m)
3
-
1. Ultra160 HDDs are limited to a maximum of Ultra2 bus speeds.
2. Netfinity EXP200 Storage Expansion Unit ships with 10 half-high hot-swap bays which can be configured as a
single bus, two independent buses or twintailed single bus. Netfinity EXP200 includes a single 2 M Ultra2 SCSI
cable and a single hot-swap 350 W power supply. Optional hot-swap Netfinity EXP200 350W Power Supply (P/
N 37L0xxx) provides redundancy. To convert an EXP200 to a tower form factor, Netfinity EXP200 Rack-to-
Tower Conversion Kit (P/N 37L5857) is required.
3. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage
UPS or PDU). Standard country power cords only are included. If required, order Rack Power Cables according
to the number of power supplies.
4. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/
Spanish, 902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/
Italian, 907=South Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/
English:- Line Cords/ Publication Country Kits are included throughout.
5. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication
Kits are included throughout.
Limitations
Switch
P/N 00N6xxx
Netfinity EXP200
2 x 0.8mm VHDCI
Connectors
On - 2 x 5 bay bus
Off - 1 x 10 bay bus
External: LVD or SE SCSI
Internal: LVD SCSI
Auto Termination
1. Housed in a 19” rack-mountable drawer and ships standard with a
single power supply, power cord and 2 meter Ultra2 SCSI cable.
Requires IBM Netfinity Enterprise Rack (P/N 930842P) or
Expansion Cabinet (P/N 9308842X), Rack (P/N 9306900),
NetBAY22 (P/N 9306200), NetBAY3 (P/N 10L6912) or NetBAY3E
(P/N 36L9701).
External Storage Expansion Unit requires storage controllers and
external cables. Select a supported controller from the system
configurator and cables from Appendix D: Cables-Storage Units-
Controllers.