Specifications

106
Updated
17/10/00
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM  Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Netfinity 8500R Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form Factor Termination
Included
68/50-pin
Converter
Incl.
Ext. Tape
Encl.
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive N/A
16 Ultra2
LVD
89 mm (3.5”) HH or
133 mm (5.25”) HH
YN/A
10L7440
03K8756
1
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive N/A 16 133 mm (5.25”) HH N N/A
10L7440
2
03K8756
09N4040 20/40 GB DLT Internal SCSI Tape Drive N/A 8 133 mm (5.25”) FH N Y
03K8705
2
,
03K8756
00N7990 40/80 GB DLT Internal SCSI Tape Drive N/A
16 Ultra2
LVD
133 mm (5.25”) FH‘ N N/A
03K8705
2
,
03K8756
1
00N8017 60/120GB 8-mm M2 SCSI Tape Drive N/A
16 Ultra2
LVD
133 mm (5.25”) HH N N/A
10L7440
2
,
03K8756
1
Tape Autoloaders
00N79xx
9
DLT Tape Autoloader - 16 Desktop Y N/A -
00N7992 120/240GB DDS/4 Tape Autoloader N/A
16 Ultra2
LVD
133 mm (5.25”) FH N N/A 03K8756
1
External Tape Libraries
3
00N79xx
10
DLT Tape Library - 16 Desktop or Rack Y - -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
4
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
5
-16Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
6
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
7
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext. Y N
10L7440,
03K8705
10K2340 Media BayTray and LVD Cable Kit
1,8
- 16 LVD Int. Y N -
Note: Netfinity 8500R does not support internal tape drives but does include an external Ultra2 0.8-mm VHDCI SCSI connector for attachment of an external tape or tape enclosure. All tape drives and
enclosures are also supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which has an external 0.8-mm VHDCI connector. Select tape drive, enclosure and controller then use Appendix D: Cables-
Storage Units-Controllers to select an appropriate external cable
1. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit P/N 10K2340.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator
P/N 00N7956.
6. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also
included.
7. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
9. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
10. Where ‘xx’ represents a country specific power cord code:
Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.