Specifications

149
A Adapter Specifications
HP NetRAID-1M Specifications
Parameter Specification
Product Number P3410A
Card Size 6.875" x 4.2" (half length PCI)
Processor Intel i960RM™ @ 100 MHz
Bus Type PCI 2.1/2.2 - 32-bits @ 33 MHz
PCI Edge Connector 3 V or 5 V (Universal)
Bus Data Transfer Rate Up to 132-MB per second
BIOS HP NetRAID BIOS
Cache Configuration 32-MB SDRAM DIMM with ECC
Firmware 1-MB flash ROM
Nonvolatile RAM 32-KB of NVRAM for disk configuration space
Operating Voltage 5.00 V ± 0.25 V
SCSI Controllers QLogic ISP10160
SCSI Data Transfer Rate Up to 160-MB/sec with Ultra3 drives; 80-MB/sec with Ultra2
drives; 40-MB/sec with Ultra drives
SCSI Bus Low voltage differential or single-ended SCSI
SCSI Termination Active
Termination Disable Automatic through cable detection
Devices per SCSI Channel Up to 12 depending on SCSI mode and storage cabinet
SCSI Device Types
Supported
Low voltage differential or single-ended SCSI disk drives
SCSI Channels One
RAID Levels Supported 0, 1, 5,10, and 50
SCSI Connectors One 68-pin, high-density internal connector
One 68-pin, ultra-high-density external connector
Multiple Cards Up to six HP NetRAID adapters per system
Battery Backup No battery