Service manual

Chapter 1 General Information
11
PCI Hot Plug LEDs
Amber Green Status Indicated Your Action
Off
On
Power to the slot is on, and the
slot is operating normally.
Do not remove the board from the slot.
On
The slot needs attention, but
power to the slot is on.
Do not remove the board from the slot.
Off The slot needs attention, but
power to the slot is off.
You can safely remove the board from this slot.
Off Off Power to the slot is off. You can safely remove the board from this slot.
Power Supply LEDs
Green LED Indicates this NetServer Status:
Steady Green The system is powered up.
Flashing The system is in stand-by or power-save mode.
Off The AC line is unplugged or the power supply has failed.
LAN LEDs
The LH 3000 has two LEDs on either side of the RJ-45 connection. Interpret the LEDs in this way:
Local Area Network LED Status
Green LED Yellow LED LAN Status:
On/Flashing Off The LAN is connected and data is being transferred at 10Mbps.
On/Flashing On The LAN is connected and data is being transferred at 100Mbps.
Off Off The LAN is not connected or is not operational.
Main Menu
This is the status screen default display for the LH 3000:
HP NetServer
LH 3000
1. To reach the main menu from this default screen, press the Enter button.
NOTE The status screen displays two lines of an entire menu at a time.
This is the entire Main Menu:
***Main Menu****
>Event Log
>FW Info
>System Info
>Component Info
>Service
>Adjust Contrast
Menus beginning with a greater-than symbol (>) indicate sub-menu selections.