Service manual

Chapter 6 Replacing Parts
105
V
RM latches
VRM Removal/Replacement
10. Align the replacement VRM over the socket and gently press down.
11. Ensure the latches are in the closed position.
12. Re-assemble the HP NetServer and test.
Replacing the System Battery
Battery
System Board – Battery Location
The installation procedure is the same for the rack-mount and the pedestal HP NetServers once you gain
access to the system board assembly.
1. Log off all users and gracefully shut down the network operating system according to directions
in your NOS documentation.
2. Power down the HP NetServer.
3. Disconnect the power cords and cables, and if necessary, label each one to support re-
assembly.