Installation guide

39
4 Installing Mass Storage Devices
Introduction
The HP NetServer standard configuration is:
One hot-swap mass storage cage (primary)
◊ Configured with a single SCSI bus
◊ Installed with requested drives
◊ With filler panels in the slots not occupied by drives
An enclosure for a second hot-swap mass storage cage (secondary)
A flexible disk drive
A CD-ROM 32x drive
Non-hot-swap mass storage shelves
Non-hot-swap
drive shelf
Secondary
hot-swap
cage (requires
upgrade kit)
Primary
hot-swap
cage
CD-ROM
drive
Flexible
disk drive
Figure 4-1. Standard Mass Storage Configuration