Installation guide

Chapter 3 Opening and Closing the HP NetServer
34
Cover 1
Cover
Cover 3
Thumbscrew
Thumbscrew
2
Figure 3-7. HP NetServer LH 3000r Covers
8. Remove Cover 2 by supporting it with your hand, then loosening the
thumbscrew and pulling the cover forward to disengage it. Lift it away
from the chassis (see Figure 3-7).
9. Remove Cover 3 by supporting it with your hand, and loosening the
thumbscrew with the other hand. Pull the cover forward to disengage it and
catch it as it falls away from the chassis.